Shreeji Weld Industries

• Robust construction
• Easy to use
• Ruggedness
• Excellent strength

• Bandsaw Blades cut straight exactly at right angles and free of burrs- Welding current, upsetting pressure and upsetting way set according to blade width with blade ends rigidly clamped using special quick acting jaws- The automatic welding cycle starts by depressing welding lever- Two ends are heated up to forging temperature in few seconds- These are then automatically forged (upset) and current switches off
• Annealing Attachment: Upsetting pressure is now turned to annealing - Job is again clamped properly with extended jaws distance that comes in automatically flipping the lever to annealing position- By turning annealing switch on, the heat position are provided and the joint is annealed so as to normalize brittleness in welded zone

• Dimensional accuracy
• Hassle-free performance
• High functionality
• Longer service life

• Precisely engineered
• Long service life
• High strength
• Robust construction

• Single Phase: 220 volts
• Double Phase 440 volts

• Application specific design
• Excellent strength
• Dimensional accuracy
• Damage resistance

Additional Information:

• Item Code: ELE-03

• Minimum maintenance
• High welding speed
• Hassle-free performance
• High functionality
• Robust construction

Applications:
Include upset butt welding of all profiles of wires and flats of iron, steel, alloy and carbon steel, copper, Aluminium, brass and other light metals and their alloys.

Users Include:
But are not limited to wire and strip and rod drawing mills transformer motor and switch gear manufacturers band saw and hacksaw blade users, small tool makers such as for welding mild steel shanks to the alloy steel portion of taps, drills, bits, screw dirvers chisels, etc. hoop and ring makers; wire forming industries; cable industries; automobile industries air-conditioner and refrigerator makers; office equipment makers. etc.

Technical Specifications:

• Sturdy construction
• Low maintenance
• Optimum strength
• Resistant to adverse conditions

• Upset Travel - Movable platen travel on two parallel guides.
• Upset pressure - provided by a precision spring action on the movable platen.
• Clamps - Lever operated adjustable 'floating' steel clamps of precision quick acting design ensure firm preset clamping pressure. Release quick and easy.
• Electrodes - Special wear resistant copper alloy electrodes provided with precision 'V' grooves permit rapid and accurate alignment of wires
• Adjusment of welding current by means of a 8 step rotary switch from 50% to 100%
• Electrode Spacing - Obtained with ease by a lever set against an indexing plate, adjusting in 10 steps.
• Annealing Facility - Separate annealing electrodes with screw type clamps provided for ease and quick annealing of the welded job.

• Longer working life
• Robust construction
• Sturdy construction
• Easy to install

• Micro Wire Butt Welder automatic welding machine has a set value of 10 for welding current and the initial upset gap. The upsetting pressure can be set according to the size of the wire. Special quick acting clamps are used to hold wire for perfect alignment of the ends to be welded. Welding is simply initiated by a press of button and the complete cycle is automatically completed with built in controls.

• Longer service life
• Resistance against crack 
• Sturdy construction
• Optimum strength

• High tensile strength
• Dimensional accuracy
• Damage resistance
• Easy to install

• Welding range of our 5 KVA Pedal Operated Wire Butt Welder: M.S - 2 mm - 8 mm.